1
    1. 200A, 15-35kV Loadbreak Elbow ConnectorThe CEE loadbreak elbow connectors are fully insulated and possess insulated plug-in terminations. These connectors are molded using high quality peroxide-cured EPDM insulation. Our loadbreak elbow connectors are manufactured in strict accordance with the ANSI/IEEE std 386-2006 and GB/T12706.4-2002 standards.
    1. 200A, 15kV Fused Loadbreak Elbow ConnectorThe fused loadbreak elbow connector combines the conventional 200A loadbreak elbow connector with a special made current limiting fuse, which can protect the voltage transformers against excessive current. It adopts removable fuse design, meaning the fuse can be easily replaced. The fuse status can be shown by connecting our fused loadbreak ...
    1. 200A, 15kV Grounding Elbow ConnectorThe CEE JDT-15/200 Grounding Elbow is the essential component for testing the cables and underground apparatus. A grounding elbow at each end of a cable will isolate and ground the cable and keep bushings free from moisture and contamination during the grounding operation.
      ...
    1. 250A, 24kV Deadbreak Elbow ConnectorThe KZT-24/250 deadbreak elbow connector is a fully shielded and insulated, touchable cable connector. It has a rated current of 250A and is suitable for power cables with cross section area of 25 to 120mm2. This deadbreak elbow connector adopts peroxide-cured EPDM insulation. It can be used to connect underground cables to transformers, ...
    1. 600A, 15-35kV Deadbreak Tee ConnectorThe CEE 600A deadbreak tee connector is used to connect high voltage underground cable to dead-front apparatus such as transformers, switches and switchgears. It is fully shielded, submersible, and rated 600A. This tee connector is manufactured in compliance with the ANSI/IEEE 386 standard. The capacitive test point on the insulating ...
    1. 630A, 24kV -36kV Shielded Sub-Connector with Cable Adapter and Jacket SealThis sub-connector is manufactured in strict compliance with the DIN 47636 standard. It can be used to connect underground cable to switchgear, RMU, deadbreak bushings, etc. Our shielded sub-connector is designed for use on solid dielectric cables such as XLPE and EPR. It can link with other sub-connectors to provide more cable branch circuits.
    1. 630A, 24kV-36kV Shielded Fore-Connector with Cable Adapter and Jacket SealThis fore-connector is manufactured in strict compliance with the DIN 47636 standard. It can be used to connect underground cable to switchgear, RMU, deadbreak bushings, etc. Our shielded fore-connector is designed for use on solid dielectric cables such as XLPE and EPR. It can link with sub-connectors to provide more cable branch circuits.
    1. 630A, 24kV Shielded Sub-Connector with Silicone RubberThis sub-connector is manufactured in strict compliance with the DIN 47636 standard. It can be used to connect underground cable to switchgear, RMU, deadbreak bushings, etc. Our shielded sub-connector is designed for use on solid dielectric cables such as XLPE and EPR. It can link with other sub-connectors or fore-connectors to provide more cable branch circuits.
    1. 630A, 24kV Shielded Fore-Connector with Silicone RubberThe CEE KQTX-G-24/630 shielded fore-connector with silicone rubber is a shielded and insulated termination. It has a rated current of 630A and can be connected to underground cables with conductor cross sections ranging from 35 to 400mm2. This fore-connector is manufactured in strict compliance with the DIN 47636 standard.
    1. 250A, 24kV Deadbreak Straight Connector with Cable Adapter and Jacket SealThe BZTT-24/250 deadbreak straight connector is a fully shielded and insulated plug-in termination. It has a rated current of 250A and can be connected to underground cables with conductor cross sections ranging from 25 to 120mm2. This connector adopts peroxide-cured EPDM insulation. It can be used to connect underground cable to switchgear, ...
    1. 630A, 36kV Straight ConnectorThe YJZNP-36/630 straight connector is a fully shielded and insulated plug-in termination. It has a rated current of 630A and can be connected to underground cables with conductor cross sections ranging from 50 to 400mm2. This straight connector plays essential role in high-voltage electrical connection of padmount transformers, submersible transformer, switchgear, deadbreak ...
    1. 250A, 24kV Deadbreak Bushing InsertThe CEE ODTT-25/240 deadbreak bushing insert threads into a universal bushing well to provide the same function as a one piece bushing. Combing with a comparably and submersible connection insert, a fully shielded and submersible connection for deadbreak operation is achievable. The deadbreak bushing insert is molded using high ...

Separable Connector, Cable Connector

The CEE separable cable connectors are fully-shielded and insulated plug-in terminations can be used to connect underground cable with transformers, switchgear and junctions equipped with loadbreak bushings. These connectors are molded using high quality peroxide-cured EPDM insulation. They are essential components for high-voltage electrical connection of the pad-mounted transformers, submersible transformer and loadbreak junctions. CEE Power System's loadbreak separable insulated connectors and its accessories are in accordance with GB/T 12706.4-2002, ANSI/IEEE std 386-2006, their electrical, mechanical and dimension are all designed to be fully interchangeable with many major manufactures which complying with IEEE std 386 and IEC 60502-4.

As a China separable cable connector manufacturer, CEE provides a comprehensive range of medium voltage power distribution equipment, including bushing surge arrester, cold shrink indoor termination, overhead short circuit fault indicator, to name a few. Our company has received the ISO9001 and ISO14001 certificates, and our products have been CCC certified. We are located in Fuzhou City, Fujian Province, which provides us with easy access to convenient sea, land and air transportation.