1. M.O.V Shielded Sub-Surge Arrester The M.O.V. shielded sub-surge arrester housing interface conforms to ANSI/IEEE 386 standard 386--Separable Insulated Connector System. The arrester housing is molded with high quality EPDM insulating material, when mated with a comparably rated product; it provides a fully shielded insulating connecter for energized operation. ...
    1. 17/40.5kV M.O.V Bushing Surge ArresterThe CEE DTTBQ-17/45 bushing surge arrester is an M.O.V. surge arrester combined with a loadbreak bushing insert. It mounts directly to the transformer bushing well. The bushing surge arrester threads into a universal bushing well provide the same function as a rotatable feedthru insert. Not only the bushing ...
    1. 17/40.5kV M.O.V Elbow Surge ArresterThe CEE BlQ-17/45 M.O.V elbow surge arrester combines metal oxide varistor technology in a pre-molded rubber elbow to provide over-voltage system protection in an insulated, full shielded, submersible, dead-front device. It is typically used at the end point of a radial circuit or at the open point of a loop-feed circuit to provide ...
    1. M.O.V Shielded Sub-Surge Arrester with SiliconeThe GXBLQ-H-26/66   M.O.V. shielded sub-surge arrester with silicone rubber is full insulated, full shielded, and can be connected with the KQTX-G-24/630 shielded fore connector or CEE KHTX-G-24/630 shielded sub connector. Our M.O.V. shielded sub-surge arrester with silicone are designed for pad-mounted transformer, entry cabinets, ...

MV Separable Surge Arrester

The MV separable surge arrester is designed for pad-mounted transformer, entry cabinets, switching enclosing enclosures and other installations to provide shielded dead-front arrester protection. The M.O.V elbow surge arrester and M.O.V bushing surge arrester can be used with 200A loadbreak interfaces to protect the distribution systems form over-voltage, protect equipment and extend cable life. The arresters are molded with high quality EPDM or silicone rubber insulating materials; they are designed as per IEC60099-4:1991 standard.

Description Base Part Number note
M.O.V. Elbow Surge Arrester CEE BLQ-①/② 1,2,3
M.O.V. Bushing Surge Arrester CEE DTTBQ-①/② 1,2,3
M.O.V. Shielded sub-Surge Arrester CEE AKBLQ-H-①/② 1,2,3
M.O.V. Shielded fore-Surge Arrester with Silicone Rubber CEE GKBLQ-Q-①/② 1,2,4
M.O.V. Shielded sub-Surge Arrester with Silicone Rubber CEE GKBLQ-H-①/② 1,2,4

Note:
1. ① refers to voltage rating, Insert duty cycle voltage rating directly after the base part number.
2. ② refers to residual voltage value at 5kA or 10kA Impulse Current. Insert the value after the voltage and slash sign.
3. M.C.O.V = 8 refers to 13,6kV
4. M.C.O.V = 17 refers to 24.4kV

Main Electrical Characteristic

Duty Cycle Voltage Rating(kV) MCOV(kV) Maximum Discharge Voltage(kV Crest) 8/20μs Current Wave Standard nominal discharge current, kA

10
12
15
17
21
24
27
30

8
10.2
12.7
13.6
17
19.5
22
24.4

27
32.4
40.5
45
53.9
61.6
69.3
76.5

5
5
5
5
5 or 10
5 or 10
5 or 10
5 or 10

Material
The MV separable surge arrester is molded with EPDM or silicone rubber insulating materials.

As a China MV separable surge arrester manufacturer, CEE provides a comprehensive range of medium voltage power distribution equipment, including bushing surge arrester, cold shrink indoor termination, overhead short circuit fault indicator, to name a few. Our company has received the ISO9001 and ISO14001 certificates, and our products have been CCC certified. We are located in Fuzhou City, Fujian Province, which provides us with easy access to convenient sea, land and air transportation.