1
    1. 200A, 15-35kV Loadbreak Elbow ConnectorThe CEE 200A 15-35kV loadbreak elbow connectors can be used to connect underground cables with transformers, switchgears and 200A junctions equipped with loadbreak bushings. These components are essential for high-voltage electrical connection of the padmount transformers, submersible transformer and loadbreak junction.
    1. 200A, 15kV Fused Loadbreak Elbow ConnectorThe fuse status can be shown by connecting our fused loadbreak elbow connector with the CEE DDX hot line voltage indicator. This connector is fully shielded by highly insulating materials and is an ideal tool for connecting underground cables to potential transformers, switchgears, and more.
      ...
    1. 200A, 15kV Grounding Elbow ConnectorThis elbow connector is made with a copper connector, tin plated copper probe, orange insulating rubber and a 2-meter 600V copper ground cable.
      Our grounding elbow connector can be used either itself or with a loadbreak bushing insert. It helps to ground cables, ...
    1. 250A, 24kV Deadbreak Elbow ConnectorIt can be used to connect underground cables to transformers, switchgears, deadbreak bushing equipped RMU, etc. Our deadbreak elbow connector possesses test points for hot line voltage indicator connection. It is an essential component for high voltage electrical connection of padmound transformers and Ring Main Units.
    1. 600A, 15-35kV Deadbreak Tee ConnectorThe CEE 600A deadbreak tee connector is used for dead-front underground installation in 600A distribution feeders. It can provide complete shielded and fully submersible cable connection for apparatus such as transformers and switchgears.
      ...
    1. 630A, 24kV -36kV Shielded Sub-Connector with Cable Adapter and Jacket SealThe KHT-24/630-J shielded sub-connector is a shielded and insulated termination. It has a rated current of 630A and can be connected to underground cables with conductor cross sections ranging from 35 to 400mm2. This sub-connector is manufactured in strict compliance with the DIN 47636 ...
    1. 630A, 24kV-36kV Shielded Fore-Connector with Cable Adapter and Jacket SealOur shielded fore-connector is designed for use on solid dielectric cables such as XLPE and EPR. It can link with sub-connectors to provide more cable branch circuits. The built-in test point allows a hot line voltage indicator to be connected. Moreover, this model can be mated with KBLQ-17/45 surge arrester for over-voltage protection.
    1. 630A, 24kV Shielded Sub-Connector with Silicone RubberThe KHTX-G-24/630 shielded sub-connector with silicone rubber is a shielded and insulated termination. It has a rated current of 630A and can be connected to underground cables with conductor cross sections ranging from 35 to 400mm2. This sub-connector is manufactured in strict compliance with the DIN ...
    1. 630A, 24kV Shielded Fore-Connector with Silicone RubberThe CEE KQTX-G-24/630 shielded fore-connectors come with high quality peroxide-cured silicone rubber insulation. It is used to connect underground cable to switchgear, RMU and 630 amps junctions equipped with deadbreak bushings.
      ...
    1. 250A, 24kV Deadbreak Straight Connector with Cable Adapter and Jacket SealOur deadbread straight connector plays vital role in high-voltage electrical connection of padmount transformers, submersible transformer, switchgear, deadbreak bushings and many other dead-front apparatus. The straight shaped design allows cables to go through more easily. The built-in test point allows a hot line voltage indicator to be connected. ...
    1. 630A, 36kV Straight ConnectorThis straight connector plays essential role in high-voltage electrical connection of padmount transformers, submersible transformer, switchgear, deadbreak bushings and many other dead-front apparatus. The straight shaped design allows cables to go through more easily. The built-in test point allows a hot line voltage indicator to be connected.
    1. 250A, 24kV Deadbreak Bushing InsertThis insert can be installed straight by hand without any additional tools. An internal hex broach allows for positive torque controlled installation. Using the optional installation torque tool the bushing insert can be properly tightened into the bushing well without the fear of accidentally breaking the bushing well stud.

CEE is a China based cable accessories manufacturer, specializing in the production and manufacture of separable connector, cable connector, MV separable surge arrester, fault indicator, distribution box, and so. Due to their superior quality and competitive prices, our products are sought after by customers from Mexico, Peru, Chile, the USA, Brazil, the United Kingdom, among others. Our company has received the ISO9001 and ISO14001 certificates, and our products have been CCC certified. We are located in Fuzhou City, Fujian Province, which provides us with easy access to convenient sea, land and air transportation. We look forward to working with customers all over the globe!